Engine Ch 1 page 110 Camshaft Removal 1. Remove the flywheel as described in Removing the flywheel. 2. Remove the flywheel housing as described in Removing the flywheel housing. 3. Remove rocker arms, pushrods and valve bridges. 4. Remove the camshaft gear. 5. Remove the intermediate gear and the guide flange bolts. 6. Remove the timing gear plate. 7. Remove the camshaft covers. 8. Remove the valve tappets. Note: Mark the valve tappets because they must be refitted in the same places. 9. Pull the camshaft backwards. Take care not to damage the cams and bearings. SHOP MANUAL MT41 - 12.2004