Scania — Replacement of camshaft bearing

Engine Ch 1 page 111 Replacement of camshaft bearing Work description 1. Remove the camshaft according to the section Camshaft, removal. 2. Remove the camshaft cover at the front end of the engine. Note: Wipe around the edges and the bearing seat surfaces around the old bearings to avoid damaging the contact surfaces when fitting the new bearings. 3. Wipe the bearing seat surfaces clean around the old bearings. Note: The recess in the bearing joint must be turned towards the front of the engine. 8467 4. Place the new bearings in the space between the bearing seats for the camshaft. 1. Threaded stem with eight flange nuts 2. Press drift 3. Flange 5.

Place the flange nuts on the threaded stem, included in tool 8467, as illustrated. 8467 SHOP MANUAL MT41 - 12.2004