Scania — Knocking noise

Engine Ch 1 page 166 SHOP MANUAL MT41 - 12.2004 Effect Cause Troubleshooting Action Piston seizure (may be caused by clogged pis­ ton cooling nozzles) Wrong injection timing Worn collets on ex­ haust valves Broken upper pis­ton rings Incorrectly adjusted injection pump Disconnect one delivery pipe at a time and listen for changes in the engine sound. WARNING!

Be careful when disconnecting the delivery pipes as the pressure is extremely high and could cause injury Broken delivery valve spring (after-injection) Connecting rod bear­ ing seizure Faulty injector (seized, worn, incorrect or cracked tip, fatigued spring) Incorrectly adjusted injector More than 1 washer under injector Fuel leakage in flame start Check whether it leaks. (Take out the flame start and run the engine with fuel pipe connected) Loosened big end cap Melting damage on piston crown Check the injection tim­ing Incorrectly adjusted injector