Scania — High oil consumption

Engine Ch 1 page 167 High oil consumption SHOP MANUAL MT41 - 12.2004 Effect Cause Troubleshooting Action Blue smoke under load Piston ring seizure Combustion tempera­ ture too high? Cylinder seizure Liner wear Unclean intake air? Carbon polishing (in patches) Poor grade of oil? Piston ring wear Piston rings stuck Tapered piston rings fit­ted wrong way Broken piston rings Individual piston rings broken = incorrectly fitted Several upper rings broken = start spray used wrongly, wrong injection timing (too early) Several intermediate rings broken = worn rings or grooves Worn valve guides Check the clearance between valve and guide. High exhaust tempera­ ture? Poor grade of oil?

Oil level too high? Defective shaft seals in turbocharger Check whether oil is present in the compres­ sor or intake manifold Clogged air filter Excessive vacuum in the air intake before the tur­bocharger Measure the vacuum (max. 500 mm wc) Check the air filter Oil viscosity too low Deformed/incorrectly directed piston cooling nozzles