Scania — Checking, adjusting the PDE injector rocker arms

Engine Ch 1 page 67 Checking, adjusting the PDE injector rocker arms 3. Adjust the unit injector for cylinder No. 5. See Adjusting unit injectors. 4. Rotate the flywheel 1/3 turn at a time using tool 8405 and repeat steps 1 - 3 and adjust as per the order of adjustment below. UP TDC Order of adjustment for valve clearance: 1-5-3-6-2-4 Order of adjustment for PDE unit injector: 5-3-6-2-4-1 8405 Rotate the flywheel using tool 8405 so that the mark on the flywheel is visible in the upper window according to the table below. NOTE ! The adjustable value for the injectors are aprox ±0,2 mm. If the value is e.g. 0,8-1,0 mm, then check the position of engine.

Start the adjusting prosedure again and follow the table be­ low. SHOP MANUAL MT41 - 12.2004 Mark on flywheel (reading from at the top) Valve change on the cylinder Adjust injector rocker arm on cylinder Adjust valve on cylinder TDC Up 0° 1 2 6 5 4 2 3 1 4 TDC Up 0° 6 5 1 2 3 5 4 6 3