Scania — Checking, adjusting the PDE injector rocker arms

Engine Ch 1 page 68 NOTE ! Machine 810001-81108: Dimension A = PDE31: 66.9 +/- 0.1 mm Dimension B = PDE31: 36.5 mm Machine 810109 (Tier 3) - Dimension A = PDE32: 69.9 +/- 0.1 mm Dimension B = PDE32: 38,5 mm Placing of the tool 512263 (or 512264 (Tier3) Check the clearanse, using a finger to sense that the small piston is level with the flat upper surface of the tool. It is a good idea to mark the rocker arm with a pen after adjustment to keep track of what has already been adjusted. Torque tighten the lock nut to 39 Nm after adjusting. SHOP MANUAL MT41 - 12.2004