volvo — Volvo Trucks Service Manual Group 177-500

Group 170 Preventive Maintenance Lubrication Make sure that grease fittings are cleaned off before fill- ing grease. Dirt on the fitting that is not cleaned off is pushed into the part with the new grease. Always fill grease to the point where old grease and contaminants are forced out from the part and only new grease comes out. If grease cannot be filled so old grease is forced out or if new grease exits without pushing old grease out, note this on the form for repair. If a fitting does not ac- cept lubrication due to damage or internal stoppage, replace with a new fitting. Do not heat the part for better grease application where rubber or plastic parts are involved.

Remove excess grease from fittings, spring shackles and other surfaces. 35