Group 170 Preventive Maintenance Note: For VN vehicles only. Front Axle Steering Knuckles Note: For further information concerning the steering system refer to Function Group 6. Volvo: Two grease fittings on each side: one on the top knuckle cover (fill with grease until the old grease is forced out past the top seal), one on the bottom cover (fill with grease until the old grease is forced out past the bottom seal). Note: Lubrication of the Volvo axle should be done with the wheels on the ground! Front Axle Steering Knuckles Meritor and Eaton: Raise the axle so the wheels are off the ground before attempting to grease the steering knuckles. Two grease fittings on each side:
one on the top knuckle cover, fill with grease until the old grease is forced out past the top seal; one on the bottom cover, fill with grease until the old grease is forced out past the bottom seal. 36 1 Chassis Lubrication