Group 170 Preventive Maintenance For further information concerning component specifica- tions see service information in Group 1, “Oil and Filter Change Intervals for Volvo Components, All Models”, Publication Number 175-001, and any appropriate ven- dor literature. Change engine oil and filters. If required by customer, take a sample of the oil for analysis. Note: Make sure the oil type is correct and has the cor- rect viscosity. The two are not the same and are equally important in giving the right protection for the engine. A Oil Plug B Oil Filter Oil Change Before working on a vehicle, set the parking brakes, place the transmission in neutral, and block the wheels.
Failure to do so can result in unexpected vehicle movement and can cause serious personal in- jury or death. WARNING Serious burns can result from contact with a hot en- gine or engine oil. Take precautions when draining the oil. Wear gloves and let the engine cool down before draining. CAUTION 1 Regulator Valve Prolonged contact with the used engine oil may be harmful. Use rubber gloves when handling used oil. Wash skin thoroughly if it comes in contact with used oil. 2 Bypass Valve for Oil 3 Overflow Valve for Oil Filters (By- pass) It is important to drain as much oil as possible. Try to change oil immediately after driving, when the oil is warm.
Always replace the oil filters when changing oil. 4 Reducing Valve Note: It is not recommended to mix synthetic oils with petroleum based oils. Note: Always dispose of oil according to Federal and lo- cal regulations. Used oil disposed of inappropriately can contaminate nature, waterways, community drinking wa- ter, and kills wildlife. Note: For Oil Change Intervals for the D7 and D12 En- gines refer to Function Group 2. 42 3 Change Engine and Oil Filters