volvo — Volvo Trucks Service Manual Group 177-500

Group 170 Preventive Maintenance Before working on a vehicle, set the parking brakes, place the transmission in neutral, and block the wheels. Failure to do so can result in unexpected vehicle movement and can cause serious personal in- jury or death. Note: For further information refer to “Transmission” page 12. For further information concerning component specifica- tions see service information in Group 1, “Oil and Filter Change Intervals for Volvo Components, All Models”, Publication Number 175-001, and any appropriate ven- dor literature. Transmission fluid cools, lubricates, and transmits hy- draulic power. Always maintain proper fluid level.

If fluid level is too low, the torque converter and clutches do not receive an adequate supply of fluid and the transmission overheats. If the level is too high, the fluid aerates caus- ing the transmission to shift erratically and overheat. Fluid may be expelled through the breather or dipstick tube when the fluid level is too high. Transmission fluid check: 1 Clean all dirt from around the end of the fluid fill tube before removing the dipstick. Do not allow dirt or foreign matter to enter the transmission. Dirt or foreign matter in the hydraulic system may cause undue wear of transmission parts, make valves stick, and clog passages.

Check the fluid level using the following procedure and record the level in your maintenance log. 2 Always check the fluid level reading with the engine running at least twice. Consistency is important to maintaining accuracy of the reading. If inconsistent readings persist, check the transmission breather to be sure it is clean and unclogged. 45 5 Check Oil Level in Automatic Transmission