volvo — Volvo Trucks Service Manual Group 177-500

Group 170 Preventive Maintenance Hot Check: Note: The fluid must be hot to insure an accurate check. The fluid level rises as the temperature increases. 1 Operate the transmission in Drive (D) range until normal operating temperature is reached: sump temperature 71–93 C (160–200 F) converter-out temperature 82–104 C (180–220 F) 2 Park the vehicle on a level surface and shift to Neu- tral (N). Apply the parking brake and chock the wheels. Allow the engine to idle (500–800 rpm). 3 With the engine running, remove the dipstick from the tube and wipe clean. Insert the dipstick into the tube and remove. 4 Check the fluid level reading. Repeat the check pro- cedure to verify the reading.

5 If the fluid level is not within the “HOT RUN” band, add or drain as necessary to bring the fluid level to within the “HOT RUN” band. 47