Group 170 Preventive Maintenance Use Service Information in Function Group 23 as a refer- ence. When reading fault codes perform the following: The engine is off. The parking brake is applied. The starter key is in the drive position (I). 1 Read on the instrument cluster display that no fault codes are saved in the ECU. Note: Fault codes can also be traced using a diagnostic program run through a PC. Engine ECU Note: Refer to pertinent VCADS Pro Tool documentation. Note: Use Service Information in Function Group 59 as a reference. To complete the Fault Code Check for ABS perform the following: 1 Check that no fault codes are saved in the ABS ECU.
2 Write down any fault codes that require correction. Note: Fault codes can also be traced using a diagnostic program run through a PC. Note: Refer to pertinent VCADS Pro Tool documentation. 57 21 Check for Fault Codes in the Engine Elec- tronic Control Unit 22 Check for Fault Codes in the ABS, anti- lock brakes