Group 170 Preventive Maintenance Engine Compartment Checks For further information refer to Function Groups 2 and 3. Charging System An alternator with an integrated regulator is used to sup- ply power to the vehicle electrical system. The charging system voltage should be checked periodically to prevent overcharging or undercharging the batteries and to de- tect any voltage drop in the wiring. Ensure that the engine cannot be started while work- ing around the fan area. Failure to do so may result in serious personal injury or death. Note: This check is also considered Noise Emissions Control Maintenance, which is required maintenance for any Volvo vehicle.
For further information on Noise Emis- sions refer to “Noise Emissions” page 6. To perform a function check of the Drive Belts complete the following: 1 Check fan belts for correct tension. 2 Inspect the belts for wear, cracks and fraying. 3 Check along the belts for proper alignment. 4 Visually inspect hubs and pulleys for wear and dam- age. 5 Inspect the vibration damper for leaks or any sur- face damage. 68 36 Check Alternator Mounting and Electrical Connections 37 Check Drive Belts