volvo — Volvo Trucks Service Manual Group 177-500

Group 170 Preventive Maintenance Note: For further information refer to literature in Func- tion Group 7. To perform a check of the Sealing on the Rear Axle and Hub Reduction Gear complete the following: 1 On the Rear Axle, inspect around the mating sur- faces for leaks past the gasket. 2 Check brake chamber and air tubing condition. 3 Check Hub Reduction Gear for any leaks or cracked sealant. Note: For further information refer to literature in Func- tion Group 7. To perform a check of the Bearing Clearance in the Pin- ion and Rear Axle complete the following: 1 Use a dial indicator to check bearing clearance in the Pinion and Rear Axles.

The clearance should be within 0.04 to 0.12 mm (0.001 to 0.005 in.). 80 55 Check Sealing of Rear Axle and Hub Re- duction Gear 56 Check Bearing Clearance in Pinion and Rear Axle Input Shaft