volvo — Volvo Trucks Service Manual Group 177-500

Group 170 Preventive Maintenance Note: For further information refer to literature in Func- tion Group 2. Note: This check is also considered Noise Emissions Control Maintenance, which is required maintenance for any Volvo vehicle. For further information on Noise Emis- sions refer to “Noise Emissions” page 6. To perform a check of the exhaust pipe, Silencer or Par- ticulater complete the following Check if there is exhaust leakage around the ex- haust ports on the cylinder heads, at the intake and exhaust manifolds, and at the flanges; exhaust pipe(s), Silencer or Particulate Filter. Check if there is exhaust leakage at the jointing clamp for the front exhaust pipe.

To perform a check of the Springs and U-bolts complete the following: 1 Check the springs for damaged or broken leaves. 2 Check the spring bushing location in the spring eye. 3 Inspect the U-bolts for signs of movement or wear. 4 Check that the spring center is aligned with the cen- ter of the spring pad on the front axle beam. Verify this alignment by inspecting the underside of the spring to see if there are any signs of movement be- tween the spring and the axle member. 81 57 Check Exhaust Pipe, Silencer, or Particu- later Filter 58 Check Springs and U-Bolts