Komatsu — OPERATIONS AND CHECKS AFTER STARTING ENGINE

. OPERATION OPERATION OPERATIONS AND CHECKS AFTER STARTING ENGINE WARNING BREAKING-IN THE MACHINE CAUTION 3 - 87 Em e operation is abnormal or any other t rouble occurs, turn the key in the starting switch to the O If th e work equipment is operated withou t warming up the machine sufficiently, the response of t he work equipment to the vement of the control lever will be slo w. The work equipment may not move as the operator de sires. Follow all warm-up cedures. Particularly in cold areas, m NOTIC E When the hydraulic oil temperature is low, do not operate under heavy load or at high speed. There is danger that the pum p may break.

Your K omatsu machine has been thoroughly adjusted and tested before shipment. However, operating the machine under s evere condit ions at the beginning can adversely af fect the performance and shorten the machine life. l 100 hours (as indicated by the service meter). utions described in this manual. Be sur e to break-in the machine for the initia During break-in operations, follow the preca Idl e the engine for 5 minutes after sta rting it up. at high speeds. Av oid operation with heavy loads or Im mediately after starting the engine, avoid sudden starts, sudden acceleration, unneces sary sudden stops , and su dden changes in direction.

NORMAL OPERATION After t he engine starts, do not start oper ating the machine immediately. First, carry out the fo llowing operation s and check s. NOTIC E Do not compl suddenly accelerate the engine before eted. Do not minut run the engine at low idle or high idle c es. If it is necessary to run the engine at idle, app run th e engine at a mid-range speed.