Komatsu — WORK POSSIBLE USING WHEEL LOADER

. OPERATION OPERATION LOADING OPERATIONS WARNING NOTICE 3 - 101 Select the meth od of operation which w ill give the m inimum amoun t of turn ing and travel in order to provide the most efficient metho d for the jobsite Always keep t he jobsite flat, an d do not operate t he ste ering wheel suddenly or apply the brakes suddenly when the lift arm is raised with a l oaded bucket. T his is dan gerous. Never thrust t he bucket in whe n travelin g at high spee d (when loading soil or crushed rock). This is dang When the mac hine is traveling o r the wor k equipment i s raised, the moment tha t the E.C.S.S. switch (if equip ped) is turned ON, the work equip ment will move.

If operations a re carried out wit h the E.C .S.S. switch (if equipped) le ft at the ON position, the moment that t he travel damper is actuated, the work equipment will move If the tires slip , the tire life will be reduc ed, so do not a llow the tire s to slip dur Avoid excessi ve bucket shakin CROSS DRIVE LOADING Always set the wheel loader fa cing at a right angle t o the stockpile. After digging i n and scoopin g up th e load, driv e the machine straight back in reverse, then b ring the dump t ruck in between the stock pile and t he wheel loade r. t time for loading, and is extremely time. This method re quires the leas effective in red ucing the cycle