Maintenance—Every 500 Hours Grease Swing Bearing CAUTION: Prevent possible injury from unexpected machine movement if controls are moved by another person. Lubricating swing bearing and rotating the upperstructure must be done by one person. Before you lubricate swing bearing, clear the area of all persons. T140269 —UN—21MAR01 1. Park machine on a level surface. 2. Stop engine. 3. Lubricate swing bearing with 6 shots of grease at each of three grease fittings. 4. Start engine. Raise bucket several inches off the ground and turn upperstructure 45 degrees. NOTE: It is not necessary to start the engine the last time. 5. Repeat steps three times.
TX14740,0001CFB -19-20MAR01-1/1 3-8-6 060313 PN=101