Miscellaneous—Machine Adding 12—Volt Accessories IMPORTANT: This machine has a 24-volt electrical system. Installing 12-volt accessories without addition of 24-volt to 12-volt converter may cause battery failure. and manufacturer’s recommendations to determine the capacity of the converter required and its installation requirements. If standard equipment, verify if amperage is adequate for application. This machine is equipped with a 12-volt, 8-amp outlet. IMPORTANT: DO NOT connect an accessory to one battery. Connecting a 12-volt accessory to one battery will cause one battery to overcharge, and the other battery to undercharge, causing battery failure.
When possible, use 24-volt accessories. If 12-volt accessories are added, use a 24-volt to 12-volt converter. Converters are available from your John Deere dealer. Converter capacity requirements depend on the load of the accessories installed. Follow electronic dealer TX,90,DH3734 -19-17JUL07-1/1 Replacing Fuses The fuse box is located behind the seat. Remove cover. IMPORTANT: Install fuse with correct amperage rating to prevent electrical system damage from overload.
T140322 —UN—22MAR01 Fuse (Blade-Type) Color Codes Amperage Rating Color 1 Black 3 Violet 4 Pink 5 Tan 7-1/2 Brown 10 Red 15 Light Blue 20 Yellow 25 Natural (white) 30 Light Green 1— 5 Amp—Radio And Monitor Controller Backup 2— 5 Amp—Pump And Valve Controller 3— 20 Amp—Starter Relay 4— 10 Amp—Solenoid 5— 5 Amp—Travel Alarm 6— 5 Amp—Pump And Valve Controller 7— 5 Amp—Monitor Controller Power 8— 15 Amp—Diagnostic Connector 9— 10 Amp—Optional 10— 10 Amp—Engine Control Unit 20 Amp—Work And Drive Lights 12— 10 Amp—Wiper 13— 20 Amp—Air Con And Heater 14— 5 Amp—Air Con And Heater 15— 10 Amp—Horn 16— 5 Amp—Radio 17— 10 Amp—Lighter 18— 5 Amp—Dome Light 19— 10 Amp—Aux 20— 20 Amp—Start Aid (optional) T140484 —UN—28MAR01 TX14740,0001CFD -19-23MAR01-1/1 4-1-13 060313 PN=126