Miscellaneous—Machine Replacing Bucket Teeth CAUTION: Guard against injury from flying pieces of metal; wear goggles or safety glasses. IMPORTANT: Angle the drift toward the bucket to avoid damaging the rubber pin lock. T95784 —UN—10NOV88 1. Use a hammer and drift to drive out locking pin. NOTE: Alternate buckets may use different tooth assemblies. 2. Remove tooth. Bucket Teeth 04T,90,M16 -19-28MAR11-1/3 3. Inspect rubber pin lock (A) for damage. Replace if necessary. 4. If rubber pin lock has moved, reposition in slot in adapter tooth shank. A—Rubber Pin Lock T95785 —UN—10NOV88 Rubber Pin Lock 04T,90,M16 -19-28MAR11-2/3 5. Position the new tooth over the tooth shank. 6.
Drive the locking pin into the hole fully. NOTE: Check bucket teeth periodically so that wear does not extend to the bucket tooth shank. T95786 —UN—10NOV88 Tooth Shank 04T,90,M16 -19-28MAR11-3/3 4-1-14 060313 PN=127