John Deere 450CLC Excavator — Adjust Bucket to Arm Joint

Miscellaneous—Machine Replacing Bucket Tooth Tip—Heavy-Duty Bucket 1. Clean tooth (A) and tooth tip (B). 2. Insert lock removal tool under U-shaped pin (C). T6879EE —UN—06DEC88 CAUTION: Avoid possible injury. Pin may fly after it is released from tooth tip. Keep a firm grip on pin to prevent injury. 3. Remove pin. 4. Turn tooth tip counterclockwise and pull it towards you to remove. Bucket Tooth Tip—Heavy-Duty Bucket 5. Clean tooth shank. 6. Replace U-shaped pin at same time you replace tooth tip. 7. Insert tooth tip on shank turning tip clockwise. T7527DO —UN—27JUN91 8. Install U-shaped pin. Side of pin marked "FRONT" (D) must face tooth tip. Make sure pin is firmly engaged over tooth tip.

A—Tooth B—Tooth Tip C—Pin D—"Front" Mark U-Shaped Pin—Heavy-Duty Bucket 04T,90,K273 -19-23AUG12-1/1 Adjust Bucket to Arm Joint Your machine has a bucket adjustment system to take up play. When play increases, remove shims as follows: 1. Slide O-ring out of way. T95775 —UN—10NOV88 Continued on next page 04T,90,M210 -19-29JUN06-1/3 4-1-15 060313 PN=128