Operation—Operator's Station Opening and Closing the Roof Exit Cover Opening: 1. Move lock levers (1) toward center of roof exit. 2. Push on handle (2) to open roof exit cover. Closing: T136270 —UN—18DEC00 Hold handle and pull window down until levers lock in position. IMPORTANT: To maintain the impact resistance of the roof hatch, the following replacement guidelines are recommended. Replace the hatch if it has been impacted by fallen objects, or if there is visible damage, or if the transparent hatch has been in service for 5 years or more.
1— Lock Lever 2— Handle TX14740,0001C9A -19-11MAY06-1/1 Adjusting the Seat Push down lever (1) while sitting or while pulling up on seat while standing to obtain desired height . Release lever. Push down lever while sitting on seat to adjust seat to desired angle. Release lever. Pull up handle (2) to unlock seat. Slide seat to desired distance from control levers. Release handle. T140132 —UN—02MAY01 Turn knob (3) to adjust seat to weight of operator. Squeeze ball (4) to add air for lumbar firmness. Press button next to ball to release air. Pull up lever (5) to release backrest lock. Move backrest to desired position. Release lever. Pull headrest (6) upward or push downward to desired height.
Move headrest to desired angle. Pull up on armrest (7) to move armrest out of way when exiting. T140133 —UN—02MAY01 Turn dial (8) to adjust angle of armrest. 1— Seat Height And Angle Adjustment 2— Seat Fore-Aft Adjustment Handle 3— Weight Adjustment Knob 4— Lumbar Adjustment Ball 5— Backrest Adjustment 6— Headrest Height and Angle 7— Armrest 8— Armrest Dial TX14740,0001CEC -19-29JUN06-1/1 2-1-11 060313 PN=39