Operation—Operating the Machine Before Starting Work Review the operating precautions in the Safety Section of this manual. T133556 —UN—24AUG00 Use seat belt when operating your machine. Remember to fasten seat belt even during brief periods of use. DW90712,000016A -19-29JUN06-1/1 Operator's Daily Machine Check Before Starting Safety and Protective Devices Checks Walk around machine to clear all persons from machine area before starting machine. Check condition of guards, shields, and covers Overall Machine Checks Check for worn or frayed electrical wires and loose or corroded connections. Check for bent, broken, loose, or missing boom, bucket, sheet metal, track parts.
Check for loose or missing hardware Check for oil leaks, missing or loose hose clamps, kinked hoses, and lines or hoses that rub against each other or other parts. 1— Check Pedal And Lever Movement/Clean Out Cab debris 2— Check Hydraulic Oil Level 3— Check/Clean Radiator And Oil Cooler Outer Fins 4— Check Coolant Recovery Tank Level 5— Check Engine Oil Level T141222 —UN—11APR01 DW90712,000016B -19-29JUN06-1/1 Starting Engine Before Starting the Engine 3 Turn key switch to ON position. All indicator lights will stay on for 3 seconds then go off except for alternator voltage indicator (1), engine oil pressure indicator (2), and dig mode indicator (3) which will continue to stay on.
WORKMODE T140774 —UN—20APR01 2 1 1— Alternator Voltage Indicator 2— Engine Oil Pressure Indicator 3— Dig Mode Indicator Continued on next page DW90712,000016C -19-29JUN06-1/2 2-2-1 060313 PN=41