Operation—Operating the Machine Control Lever Pattern Operation CAUTION: Never place any part of body beyond window frame to avoid serious crushing injury from boom. Boom could lower if the control lever is accidentally bumped or otherwise engaged. Immediately replace a missing or broken window. T137500 —UN—25JAN01 Never place any part of the body beyond the window frame. Replace missing or broken windows immediately. CAUTION: Prevent injury from unexpected control lever function. Be aware of the control lever pattern used on the machine before operating.
Excavator Control Lever Pattern The machine comes equipped from the factory with the excavator control lever pattern and has the corresponding black-on-white labels installed on the left and right control consoles. T137498 —UN—25JAN01 When changed to the backhoe control lever pattern the corresponding black-on-yellow labels must be installed on the left and right control consoles. Check the pattern on the labels and then carefully operate the machine to verify that the correct labels are installed. NOTE: A Control Pattern Selector Kit is available through parts, that when installed, changes the control lever pattern using a solenoid valve.
Backhoe Control Lever Pattern Control levers return to neutral when released. Functions will stop and remain positioned. Also the parking brake for swing and travel will engage. 1— Arm Out 2— Arm In 3— Swing Left 4— Swing Right 5— Boom Down 6— Boom Up 7— Bucket Load 8— Bucket Dump T137499 —UN—25JAN01 Boom, Arm, Bucket Movement DW90712,0000170 -19-29JUN06-1/1 2-2-6 060313 PN=46