Operation—Operating the Machine 18. Remove both lock pins from the slotted nuts (B) on the counterweight tie bolts (A). 19. Alternately loosen each counterweight tie bolt two or three turns. 20. Using a standard screwdriver, pry the corner of the lock plate (G) away from the head of each of the lower counterweight boss cap screws (F). 21. Loosen each cap screw 5 mm (0.20 in.) A—Tie Bolt (2 used) B—Slotted Nut (2 used) C—Boss Plate (2 used) D—Counterweight E—Shim (as required) F—Cap Screws (4 used) G—Lock Plate (2 used) T8172AD —UN—20FEB94 Continued on next page DW90712,0000179 -19-29JUN06-8/10 2-2-13 060313 PN=53