Operation—Operating the Machine 16. Install washers on cap screws (A). Install cap screws through counterweight and frame. 17. Install spacers and nuts (B). One flat of nut must be against tab. Turn cap screws (A) into nuts until end of cap screws are even with slotted end of nuts. A—Cap Screw (2 used) B—Nut (2 used) C—Boss Plate D—Counterweight E—Shim (as required) F—Cap Screws (4 used) G—Lock Strap (2 used) T8172AD —UN—20FEB94 Continued on next page DW90712,000017B -19-29JUN06-4/6 2-2-18 060313 PN=58