John Deere 450CLC Excavator — Towing Machine

Operation—Operating the Machine 3. Attach a short chain or cable (A) around the center of the side frame forming a loop. 4. Attach a longer chain on cable from the arm and connect to loop. A—Cable T6912AU —UN—07APR89 DW90712,000017E -19-29JUN06-2/4 CAUTION: The approximate weight of machine without counterweight is 36,100 kg (79,500 lb). 5. Lift the side frame slightly off ground with service jack (A). Specification Machine—Weight......................................................................... Without Counterweight: 36 100 kg (79,500 lb) T6912AV —UN—07APR89 A—Service Jack DW90712,000017E -19-29JUN06-3/4 6. Extend arm slowly until side frame slides up against stop guide (D). 7.

Lower machine to the ground and fasten 18 cap screws (F) (nine cap screws per section). Tighten cap screws to 1720 N·m (1270 lb-ft). Specification Cap Screw—Torque.............................................. 1720 N·m (1,270 lb-ft) T6912AW —UN—07APR89 Repeat steps 1—7 to move opposite side frame to work position. A—Side Frame Step B—Side Frame C—Track Frame D—Stop Guide E—Stop Cap Screw F—Track Frame Cap Screw DW90712,000017E -19-29JUN06-4/4 2-2-23 060313 PN=63