John Deere 450CLC Excavator — Engine Break-In Oil

Maintenance—Machine Testing Diesel Engine Coolant Maintaining adequate concentrations of glycol and inhibiting additives in the coolant is critical to protect the engine and cooling system against freezing, corrosion, and cylinder liner erosion and pitting. Add only the recommended concentration of John Deere COOL-GARD II Coolant Extender. DO NOT add more than the recommended amount. When Using Nitrite-Containing Coolants Test the coolant solution at intervals of 12 months or less and whenever excessive coolant is lost through leaks or overheating.

Compare the test strip results to the supplemental coolant additive (SCA) chart to determine the amount of inhibiting additives in your coolant and whether more John Deere Liquid Coolant Conditioner should be added. Coolant Test Strips Coolant test strips are available from your John Deere dealer. These test strips provide a simple, effective method to check the freeze point and additive levels of your engine coolant. Add only the recommended concentration of John Deere Liquid Coolant Conditioner. DO NOT add more than the recommended amount.

When Using John Deere COOL-GARD II Coolant Analysis John Deere COOL-GARD II Premix™, COOL-GARD II PG Premix and COOL-GARD II Concentrate are maintenance free coolants for up to six years or 6000 hours of operation, provided that the cooling system is topped off using only John Deere COOL-GARD II Premix or COOL-GARD II PG premix. Test the coolant condition annually with coolant test strips designed for use with John Deere COOL-GARD II coolants. If the test strip chart indicates that additive is required, add John Deere COOL-GARD II Coolant Extender as directed. For a more thorough evaluation of your coolant, perform a coolant analysis.

The coolant analysis can provide critical data such as freezing point, antifreeze level, pH, alkalinity, nitrite content (cavitation control additive), molybdate content (rust inhibitor additive), silicate content, corrosion metals, and visual assessment. Contact your John Deere dealer for more information on coolant analysis. COOL-GARD is a trademark of Deere & Company DX,COOL9 -19-11APR11-1/1 Alternative and Synthetic Lubricants Conditions in certain geographical areas may require lubricant recommendations different from those printed in this manual. Some John Deere brand coolants and lubricants may not be available in your location.

Mobil DTE25-32 Shell Tellus 46 Shell Tellus 32 Synthetic lubricants may be used if they meet the performance requirements as shown in this manual. IMPORTANT: Avoid mixing different brands or types of oils. Oil manufacturers blend base stock and additives to create their oils and to meet certain specifications and performance requirements. Mixing different oils can interfere with proper functioning of these formulations and degrade lubricant performance. The temperature limits and service intervals shown in this manual apply to both conventional and synthetic oils. Re-refined base stock products may be used if the finished lubricant meets the performance requirements.

If alternative hydraulic oils are required the hydraulic system needs to be completely flushed. This may require large amounts of oil to properly drain previous product. This excavator is factory filled with 46HN extended life zinc-free hydraulic oil. Avoid servicing this excavator with products that do not meet this specification. If oils have been mixed or if alternate service oils are desired, the complete hydraulic system needs to be totally flushed by an authorized dealer. NOTE: The following alternative oils could be used if factory fill has been completely flushed out. Texaco Rando 46 Texaco Rando 32 Consult your authorized dealer to obtain specific information and recommendations.

Mobil DTE25-46 VD76477,00000DC -19-22JUN06-1/1 3-1-7 060313 PN=71