John Deere 450CLC Excavator — Swing Gearbox and Travel Gearbox Oils

Maintenance—Machine Engine Break-In Oil After engine overhaul, fill the engine with John Deere ENGINE BREAK-IN OIL. IMPORTANT: Do not use John Deere PLUS-50® oil or engine oils meeting API CG4, API CF4, or CCMC D5 performance levels during the first 250 hours of operation of a new or rebuilt engine. These oils will not allow the engine to break-in properly. If John Deere ENGINE BREAK-IN OIL is not available, use a diesel engine oil with oil viscosity based on the expected air temperature range, and meeting one of the following, during the first 100 hours of operation: API Service Classification CCMC Specification D4 New engines are filled at the factory with John Deere ENGINE BREAK-IN OIL.

During the break-in period, add John Deere ENGINE BREAK-IN OIL as needed to maintain the specified oil level. After the break-in period, use John Deere PLUS-50® or other diesel engine oil as recommended in this manual. Change the oil and filter after the first 250 hours of operation of a new or rebuilt engine. PLUS-50 is a trademark of Deere & Company. TX,15,DX649 -19-28JUN06-1/1 Hydraulic Oil 50˚C 122˚F IMPORTANT: Avoid mixing different brands or types of oils. Oil manufacturers engineer their oils to meet certain specifications and performance requirements. Mixing different oil types can degrade lubricant and machine performance.

40˚C 104˚F Super EX 46HN Premium AW 46 30˚C 86˚F 20˚C 68˚F Daphne Super Hydro A 32 Premium AW32 Use oil viscosity based on the expected air temperature range during the period between oil changes. 10˚C 50˚F The following oil is preferred: 32˚F 4000 hour change interval: -10˚C 14˚F • Super EX 46HN Hitachi excavator oil from John Deere -20˚C -4˚F TX1079198 —UN—24JUN10 Daphne Super Hydro A 32 (For low temperature operation.) -30˚C -22˚F 2000 hour change interval: -40˚C -40˚F The following products can be used provided a complete hydraulic system flush has been performed. Contact your dealer for this procedure. Other Premium AW oils may be used: Texaco Inc.:

Rando Oil HD46 or 32 (For low temperature operation.) Mobil Oil: DTE25-46 or 32 (For low temperature operation.) Shell Oil: Tellus Oil 46 or 32 (For low temperature operation.) not approved in John Deere Construction and Forestry equipment. Use only Exxon Mobil EAL Envirosyn 46H Synthetic Esther Oil when a biodegradable oil is required. (Contact your John Deere dealer for Registration and Routine Oil Analysis to meet warranty requirements.) Biodegradable Hydraulic Oil: IMPORTANT: Other fire resistant and readily biodegradable oil (also called FR oils) are DW90712,000011D -19-10AUG10-1/1 3-1-8 060313 PN=72