Komatsu — 5.13. FUEL SYSTEM

SECTION 5 MAINTENANCE Page 38 ENGINE 1. Disconnect the ether tube at the spray nozzle in the engine manifold. Remove the spray nozzle. 2. Reconnect the nozzle to the tube. 3. Direct the nozzle away from the engine and actuate the ether injector. 4. Dribbling or no spray indicates a blocked spray nozzle or tube. If necessary, clean or replace the nozzle and/or tube. If the spray is insufficient, replace the container. CHANGING THE FLUID CONTAINER 1. Loosen wing nuts (1) securing fluid container support saddle (4). 2. Unscrew and discard container (2) from the ether starting valve in a suitable, closed refuse container. 3. Install a new container in valve (3). 4.

Secure the container in place by tightening the saddle nuts. Do not over tighten the nuts. Fig. 5.28. Installing Ether Injector 1. Mounting Nut 2. Ether Container 3. Valve 4. Saddle 5.13. FUEL SYSTEM Cleanliness of diesel fuel determines the service life of the fuel injection components. Water contaminants, allowed to reach precision injection components, cause rapid wear and poor performance. Clean fuel and regular servicing of the fuel tank and fuel filtering components are necessary for long service life. Always clean the area around the fuel tank filler cap before refueling. WARNING!

Do not smoke while filling the fuel tank or servicing the fuel system because a fire or explosion could result WARNING! When filling the fuel tank, place the fuel nozzle against the side of the neck to reduce the chance of static electricity sparks. WARNING! Never remove the fuel filler cap or fill the fuel tank while the engine is running or when the machine is indoors. The fumes are hazardous and a spark or flame can cause a fire or explosion. WARNING! Never mix gasoline, gasohol (a mixture of corn alcohol and 90 % gasoline), or alcohol with diesel fuel. This creates a fire or explosion hazard which could result in personal injury or death. OM515C520C99/1E DRESSTA