MAINTENANCE SECTION 5 Page 55 HOOD ASSEMBLY AND RADIATOR GRILL Fig. 5.48B. Hood Assembly (520C CE Version) 1. Radiator Shield 2. Door Latch 5.21. LOADER EQUIPMENT BUCKET INSTALLATION AND REMOVAL Fig. 5.49. Bucket Installation 1. Bolt 2. Pin 3. O-Ring 4,5. Shims To replace the bucket carry out as follows: 1. Park the machine on level ground or in the workshop. 2. Place the bucket in position as shown in Fig. 5.49. 3. Remove bolts (1) and tap pins (2) out. 4. Move away with the machine or lift the boom. DRESSTA OM515C520C99/1E