OPERATING SECTION 4 Page 15 INSTRUMENTS AND CONTROLS NOTE: items 26,27,35 refer to the standard machine items 34, 36, 37 refer to the upgraded machine 23. TRANSMISSION GEAR RANGE LEVER This lever is used to select the gear range according to the operating conditions. Refer to Par. 4.13 for additional information. 24. TRANSMISSION DIRECTION LEVER This lever is used to select machine direction. Refer to Par. 4.13 for additional information. WARNING: When parking a machine, lock the transmission direction lever in neutral (N) by applying the transmission direction lever lock switch. 25.
TURN SIGNAL LEVER WITH EMERGENCY LIGHT SWITCH The turn signal lever with emergency light switch is clamped on the LH side of the steering column. When pulled back toward the operator’s seat it activates the left turn signal lights. When pushed away from the operator’s seat it activates the right turn signal lights. The corresponding arrow indicator light (left of right) on top of the turn signal switch will also flash. Pull the lever to the left to make both turn signal lights flash at the same time (in CE version the emergency lights and the turn signal warning lights are located on the instrument panel - see item 6A, 14B). 26.
BOOM CONTROL LEVER The lever controls raising and lowering operations of the boom. Refer to Par. 4.17.1 for additional information. 27. BUCKET CONTROL LEVER The lever controls roll back and dumping operation of the bucket. Refer to Par. 4.17.3 for additional information. 28. AUXILIARY EQUIPMENT LEVER The lever is located: a) on the LH side of the bucket control lever in machines of standard configuration, b) on the RH side of the boom and bucket control lever in machines in CE configuration. The lever is integrated with a 3-spool control valve equipped as an optional attachment with optional mounted equipment such a multi-purpose bucket, quickcoupling etc.
It performs the following functions: a) with a multi-purpose bucket: when shifted forward it opens the bucket, when shifted back it closes the bucket. b) with a quickcoupling tool carrier: when shifted forward it locks the quickcoupling, when shifted back it unlocks the quickcoupling. 29. ACCELERATOR PEDAL Depress the pedal to increase engine speed, release the pedal to decrease engine speed. Pedal returns automatically to the low idle position. DRESSTA OM515C520C99/1E