Komatsu — 4.7.3. AIR CONDITIONER

SECTION 4 OPERATING Page 26 CAB HEATING AND VENTILATION 38 39 40 41 42 43 44 45 Fig. 4.19. Side Control Panel 38. Fan Control Switch 39. Heater/Air Conditioner Temperature Control Knob 40. Main Switch 41. Windshield Wiper Switch 42. Windshield Washer Switch 43. Defroster Fan Switch 44. Rear Window Wiper Switch (if equipped) 45. Rear Window Washer Switch (if equipped) For description of controls refer to Par. 4.3. 4.7.3. AIR CONDITIONER Fig. 4.20. Block Diagram of A/C Connections The wheel loader may be equipped with air conditioner to reduce air temperature and relative humidity inside the cab. An air conditioner consists of the following principal components: 1.

Compressor – V-belt driven thru pulley mounted on the engine 2. Condenser – radiator mounted 3. Dehumidifier – mounted on a bracket on the RH side of the rear frame 4. Evaporator – RH side cab wall mounted 5. Expansion valve – integrated with the evaporator The a/m components are connected with hoses 6 – 9. The A/C system is filled with R-134A gas. NOTE: If A/C system refilling is required contact Construction Equipment Authorized Distributor. The system must be filled in accordance with the manufacturer’s instructions. OM515C520C99/1E DRESSTA