Komatsu — 4.9. ELECTRIC SYSTEM MASTER SWITCH

OPERATING SECTION 4 Page 27 4.8. AIR CLEANER SERVICE INDICATOR Fig. 4.21. Service Indicator 1. Service Indicator The indicator is located in the upper front part of the hydraulic reservoir (behind the cab). During operation, the red band will gradually rise in the indicator window as dirt accumulates in the air filter elements. When the filter elements reach the maximum allowable restriction, the red band will completely fill the indicator window and automatically lock in this position. The red band will remain fully exposed even after stopping the engine. When this happens, filter element service is required. Press the reset button on top of indicator after the elements have been serviced.

4.9. ELECTRIC SYSTEM MASTER SWITCH Fig. 4.22. Electric System Master Switch Fig. 4.22A. Electric System Master Switch (CE Version) The switch is located on the LH side of the hydraulic tank behind the cab and is connected in series between the battery positive terminal (+) and receivers, thus turning "ON" or "OFF" battery voltage to all electric systems. The master switch must always be turned to the "ON" position when the engine is running to prevent any damage to the alternator and/or electric system. On machines in CE version the switch is located at the back on the left hand side. WARNING: Before servicing the machine, turn off the electric system master switch and remove the key.

Tag the machine to warn against starting the engine. DRESSTA OM515C520C99/1E