Operating AutoPowr Transmission Stopping And Parking The Tractor B RXA0068273 —UN—27AUG03 RXA0089425 —UN—09JUN06 A Brake Pedals Left Hand Reverser Shown In Power Zero A—Brake Pedals B—Power Zero Position CAUTION: Avoid possible injury due to losing control of tractor. Couple brake pedals (A) together when driving on roads. Avoid possible injury due to sudden or unexpected acceleration. When brake pedals are released, the tractor will automatically accelerate to the speed currently commanded by the throttle and speed control lever. 1. Reduce throttle to low engine rpm. 2. Depress both brake pedals. It is not necessary to depress the clutch .
The brakes will activate the AutoClutch (automatic clutch function within the transmission) to stop the tractor. Using PowerZero Position Hold reverser lever in Power Zero position (B) to temporarily hold tractor stationary. 3. Move speed control lever to slowest position. NOTE: Depending on speed and load, Power Zero may not bring tractor to a stop if already in motion. 4. Shift reverser to PARK position. 5. Lower implements and shut off PTO. Using NEUTRAL Position 6. Shut engine off and remove key. Transmission NEUTRAL position is obtained (with engine running) by shifting reverser to NEUTRAL position. Tractor will roll freely in NEUTRAL position.
Stopping The Tractor using the AutoClutch Depress both brake pedals. It is not necessary to depress the clutch, reduce throttle, or move the speed control lever. The brakes will activate the AutoClutch. When brakes are released, tractor accelerates to currently commanded speed. Using PARK Position CAUTION: Always place reverser lever in PARK position before dismounting tractor. Transmission PARK position holds tractor stationary. CAUTION: Avoid possible injury. Braking the tractor while commanding a high engine speed will require higher brake pedal force. OURX935,00004BE 1927AUG081/1 4211 122208 PN=108