Operating AutoPowr Transmission AutoPowr Selector Guidelines The AutoPowr selector is a fourposition switch (A) providing two automated productivity functions: Load control provides automatic transmission ground speed adjustment under load to maintain constant peak power levels and maximum productivity. Fuel economy function provides constant vehicle speed at reduced engine speed in light load or noload conditions. B C D 1 2 3 E RXA0068282 —UN—09AUG05 A CAUTION: Avoid possible injury from unexpected acceleration. When load is reduced, tractor will resume selected set speed. NOTE:
For most applications, maximum productivity and fuel economy is realized when the selector is in positions 1, 2 or 3. A—FourPosition Switch B—Position OFF C—Position 1—PTO D—Position 2—Heavy Tillage E—Position 3—Transport or Light Tillage BB92646,000001F 1916AUG051/1 AutoPowr Selector Examples C D Position 1 Most PTO and High Hydraulic Flow Applications: Use full throttle position Operating under load: transmission automatically adjusts speed to maintain Heavy Load RPM setting Operating under light load: engine speed will be approximately 2000 rpm (Low RPM Default) B 1 2 3 E RXA0068282 —UN—09AUG05 Position 2 (Auto 2) Plowing and Tillage:
Use full throttle position Adjust Auto 2 set speed to match application Operating under load: transmission automatically adjusts to maintain 1950 rpm Operating under light load: minimum engine speed is 1500 rpm A A—FourPosition Switch B—Position OFF C—Position 1—PTO D—Position 2—Heavy Tillage E—Position 3—Transport or Light Tillage Position 3 (Auto 3) Transport and Light Tillage: Use full throttle position Adjust Auto 3 set speed to match application Operating under load: transmission automatically adjusts to maintain 1950 rpm Operating under light load: Minimum engine speed is 1200 rpm Use OFF position if application is causing undesired automatic shifting.
Use OFF position when operating on steep and/or slippery downhill slopes. (See DOWNHILL OPERATION IN SLIPPERY CONDITIONS in this section.) NOTE: Minimum engine speed values of AutoPowr selector positions 1, 2, or 3 are adjustable. See SETTING AUTOPOWR OPTIONS in this section. Position OFF: Transmission will not shift automatically to maintain engine rpm with varying loads. BB92646,0000020 1917JUN051/1 4212 122208 PN=109