Hitch Setting Hitch Height Limit Hitch height limit is adjusted in the CommandCenter. B D 1. Press Hitch Raise Limit / RateofDrop Switch (A) once and observe Display (B); current height setting appears as a Height Bar Graph (C) on lefthand side. E H itch C ommand RXA0093501 —UN—23APR07 2. Turn Command Dial (D) counterclockwise to lower height limit setting; clockwise to raise setting. Changes to height setting take place immediately. Lowest height setting is limited to 25% of Hitch Position. Indicator (E) shows current hitch position. + A F 3. When desired height is reached, press Select Switch (F) to return to previous display.
Hitch Height Control Knob A—Hitch Raise Limit / RateofDrop Switch B—Display C—Height Bar Graph D—Command Dial E—Hitch Position Indicator F—Select Switch OURX935,000044E 1920AUG081/1 Adjusting Hitch RateofDrop CAUTION: Excessive drop speed may cause injury or machine damage. Fully lowering implement should take at least two seconds. C B D A 1 2 3 4 5 88 RXA0087384 —UN—02MAR06 Hitch rateofdrop is adjusted in the CommandCenter. + 1. Press Hitch Raise Limit / RateofDrop Switch (A) twice and observe Display (B); current rateofdrop appears as a Speed Scale (C) across the top. E 2.
Turn Command Dial (D) counterclockwise for slower rate setting (turtle); clockwise for faster setting (rabbit). Changes to rateofdrop setting take place immediately. Hitch Drop Speed Control Knob 3. When desired rate is reached, press Select Switch (E) to return to previous display. A—Hitch Raise Limit / RateofDrop Switch B—Display C—Speed Scale D—Command Dial E—Select Switch OURX935,00004C6 1920AUG081/1 504 122208 PN=123 C 88