Hitch Adjusting Load/Depth Control (Draft Response) D B C NOTE: Load/depth adjustment changes draft responsiveness only. Operating depth is set with hitch lever. RXA0087425 —UN—02MAR06 Hitch load/depth (draft response) is adjusted in the CommandCenter. 1. Press Hitch Load / Depth Switch (A) and observe Display (B); current draft response setting appears on Draft Response Scale (D) across the top. E A 2. Turn Command Dial (C) counterclockwise to reduce draft response or clockwise to increase. Changes to response setting take place immediately.
Zero draft response provides ”position” control (See Using Position Control.) Higher settings are used for ”draft” control (See Using Draft Control.) Using Position Control A—Hitch Load / Depth Switch B—Display C—Command Dial D—Draft Response Scale E—Select Switch 3. When desired setting is reached, press Select Switch (E) to return to previous display. OURX935,00004C7 1920AUG081/1 Using Position Control Use position control for operation of nonground engaging implements and implements equipped with floating gauge wheels. To adjust load/depth for position control, set draft response to zero.
RXA0093497 —UN—23APR07 Hitch Held at Selected Position OURX935,000000F 1902JAN081/1 505 122208 PN=124