John Deere Omar287594 — Setting Hitch Slip Response

Hitch Using Draft Control Use draft control to help maintain operating depth of non­floating tillage equipment in rolling terrain, or if tractor attitude/pitch and rear wheel sinkage force implement deeper than desired. If soil density/resistance varies, higher response setting will cause more depth variation. The best setting depends on implement type and field conditions. RXA0093493 —UN—23APR07 Typical draft settings, by implement type, are: High Response Causes More Depth Variation If Soil Varies Adjusting load/depth only changes draft responsiveness. Use hitch lever to control/change operating depth. RXA0093494 —UN—23APR07 NOTE:

Low draft response settings may slow the drop rate of some implements. Hold lever in forward detent to speed entry. Hitch will lower at the drop rate selected. Lower Response Controls Depth Better If Soil Varies RXA0093495 —UN—25APR07 Lower Response Causes More Depth Variation In Rolling Terrain RXA0093496 —UN—23APR07 Higher Response Controls Depth Better In Rolling Terrain OURX935,0000010 ­19­02JAN08­1/1 50­6 122208 PN=125 Integral Field Cultivator 4—5 Integral Moldboard Plow 3—5 Semi­Integral Moldboard Plow 2—4 Integral Chisel Plow 2—4 Integral Ripper/Subsoiler 1—3