John Deere Omar287594 — Setting Hitch Slip Response

Hitch Setting Hitch Slip Response D B NOTE: Tractor must be equipped with radar , and load/depth control must be in draft control mode for hitch slip to function. See Using Draft Control in this section. C E RXA0085779 —UN—09JAN06 Hitch can be operated with draft sensing only, or with draft sensing and hitch slip. Hitch slip adjustment is independent from draft response. Hitch slip uses wheel slip data to supplement draft control system and help maintain uniform working depth. Hitch slip only functions if wheel slip is above 10%. A CommandCenter Controls and Display A—Vehicle Settings Switch B—Command Dial C—Display D—Select Switch E—Numbered Scale 3.

Turn Command Dial (B) to adjust slip response. Higher values provide more/faster response to slip variation. Lower values provide less/slower response to slip variation. Changes to slip response take place immediately. 1. Preset operating depth and draft response, with slip response at zero. 2. Press Vehicle Settings Switch (A) and turn Command Dial (B) until Hitch Slip is highlighted in Display (C), then press Select Switch (D). Slip response setting appears as a Numbered Scale (E) across the top of the display. 4. When desired response is reached, press Select Switch (D) to return to previous display. NOTE:

Slip response automatically returns to zero during transport (speed above 20 km/h [12.4 mph]). NOTE: Changing slip response setting will only affect operation if wheel slip is above 10%. OURX935,0000450 ­19­02JAN08­1/1 50­7 122208 PN=126 Response Setting Guidelines * Chisel Plow 2—4 Subsoiler 5—7 Moldboard Plow 7—9 V­Ripper 8—10 * Appropriate setting will depend on implement type, soil conditions and tractor setup