John Deere Omar287594 — Using External Raise and Lower Switches

Hitch Using Float Operation Implements equipped with depth­gauging wheels may require float operation to follow ground contour. Press Hitch Load/Depth Switch (A) and observe display. Turn Command Dial (F) Counter Clockwise (CCW) to set Load/Depth to minimum on draft response scale (B). Hold hitch lever forward until Commanded Depth (C) shows zero, full down. Press Depth Set Switch (E) to save full down as stored depth setting. F C B 0 RXA0093552 —UN—25APR07 E D A NOTE: Lift links can be adjusted for lateral float.

(See Changing Lateral Float in this section.) Using Float Position A—Hitch Load / Depth Switch B—Draft Response Scale C—Commanded Depth D—Full Down Depth Setting E—Depth Set Switch F—Command Dial RXA0093506 —UN—23APR07 Float Operation OURX935,0000451 ­19­06AUG08­1/1 Hitch Components A A D B B E G RXA0099823 —UN—24NOV08 RXA0097040 —UN—29AUG08 C F Hitch Lever Hitch Components A—Lift Arms B—Lift Cylinders C—Lift Links D—Hitch Lever E—Center Link F—Draft Links G—Quick Coupler OURX935,0000007 ­19­24NOV08­1/1 50­8 122208 PN=127