John Deere Omar287594 — Using Correct Center Link Position

Hitch Using External Raise and Lower Switches CAUTION: To prevent injury or damage caused by tractor movement, be sure transmission is in PARK position before using external raise and lower switches. Stay clear of interference points when using external raise and lower switches. RXA0068228 —UN—05AUG08 When external switches (A) are pressed hitch moves slowly, but slowly increases speed the longer hitch switch is held down. A Press and hold external switches (A) to raise or lower hitch. Hitch moves at slow speed when using external switches. NOTE: Hitch command lever cannot be used simultaneously with external raise/lower switch.

A—External Raise/Lower Switches OURX935,00003E5 ­19­30JUL08­1/1 Using Hitch Manual Lowering Feature CAUTION: Avoid personal injury or death. Do not disconnect any hitch sensors, solenoids, or connectors from the hitch control valve when engine is operating or key switch is ON. Unexpected hitch movement may occur. Stay clear of hitch area when starting engine or manually lowering hitch. RXA0096797 —UN—10DEC07 Hitch manual lowering is possible when hydraulic pressure and/or electrical power is not available. Remove plug (A) to access the manual lowering screw (B). Turn screw counterclockwise to lower the hitch. Plastic Plug NOTE: The hitch cannot be raised mechanically.

Both hydraulic and electrical power are required to raise the hitch. RXA0096799 —UN—10DEC07 Turn screw clockwise and install plug after hitch has been lowered. A—Plug B—Manual Lowering Screw Manual Lowering Screw OURX935,0000078 ­19­16JUL08­1/1 50­9 122208 PN=128