John Deere Omar287594 — Adjusting Timed Detent

Hydraulics and Selective Control Valves Adjusting Timed Detent A CAUTION: Avoid possible personal injury. DO NOT use timed detents for loader operation. Timed Detent Function Three detent functions are available to hold each SCV function for an adjustable time. 0 second (No Timed Detent)—Hold control lever in extend or retract position. Oil flow continues until control lever is released. (This position is recommended for loaders and implements requiring frequent height or depth adjustments.) 1—60 seconds (Adjustable Timed Detent)—Move control lever to (detented) extend or retract position and release. After click, lever returns to neutral. Oil flow continues until time expires.

(This position is recommended for implements operating at full depth or with depth stops on the cylinders.) C (Continuous Flow)—Control lever is moved to full (detented) extend or retract position and released. Lever returns to neutral. Oil flow continues until control lever is moved away from Neutral or until tractor is shut off. (This position is recommended for hydraulic motor use or applications where a continuous flow of oil is required.) B RXA0097430 —UN—27FEB08 SET LOCK SET C A—SCV Switch B—Display C—Knob counterclockwise (shorter detent time or "0" zero detent time). Timed Detent Adjustment NOTE: SCV can be operated to observe detents while in adjustment mode.

Press selected SCV switch (A). Display (B) shows set time. Move SCV lever forward or rearward from neutral to cancel a detent function manually. Adjust timed detent by turning knob (C) clockwise (longer detent time or "C" continuous detent time). Turn knob OURX935,0000096 ­19­26FEB08­1/1 60­8 122208 PN=155