Remote Hydraulic Connections Using Hydraulic Motor Return P P R R RXA0085801 —UN—10JAN06 A A—Return Port Plug Hydraulic motor return kit provides a convenient port to access the tractor low pressure return circuit. Inadvertent reverse operation Pressurization of auxiliary function return line Potential flow checking of the returnside SCV coupling Remove one of the two return port plugs (A) and install hydraulic motor return coupler. If routing two return lines through a single coupler results in excessive return line pressure, install an additional connector in the second return port. Always make sure hose end and coupler are clean. NOTE:
Motors without overrunning check valves should be connected to the motor return coupler to prevent return line pressurization when SCV is returned to neutral. Using the motor return coupler will prevent: OURX935,0000095 1915JAN081/1 Using Hydraulic Motor Case Drain (Sump) P P R R RXA0085802 —UN—10JAN06 A A—Plug Remove plug (A) and install a hydraulic sump coupler available from your John Deere™Dealer. Connect motor case or seal drain hose to coupler, making sure hose end and coupler are clean. Allows oil to drain directly to reservoir (differential case) from hydraulic motor, bypassing remote coupler, SCV and filter.
John Deere is a trademark of Deere & Company Continued on next page OURX935,0000096 1915JAN081/2 6510 122208 PN=165