Remote Hydraulic Connections NOTE: Couplers may vary depending on equipment. Older equipment uses a standard coupler while newer seeding equipment may require a Flush Face coupler (B) and adapter (A) for the drain. A—Adapter B—Flush Face Coupler B RXA0082406 —UN—25JUL05 A OURX935,0000096 1915JAN082/2 Using Implement Requiring Large Volumes of Oil Check the transmissionhydraulic oil level. (See Checking TransmissionHydraulic Oil Level in the Lubrication Section.) NOTE: Do not add oil to reservoir with engine running. If additional oil capacity is needed for large one way cylinders, an optional field installed auxiliary reservoir is available. See your John Deere dealer.
Add oil if required. Lower the implement to return the oil to the reservoir. IMPORTANT: Removing too much oil can result in malfunction when raising the hitch or using the ”extend” function of SCVs. Recheck oil level when implement is removed. Drain excess oil if necessary. Cycle all implement cylinders after starting tractor. OURX935,0000097 1915JAN081/1 6511 122208 PN=166