John Deere Omar287594 — Installing and Using Clevis Assembly

Drawbar and PTO Adjusting Drawbar Height Height of drawbar is adjustable by turning offset (A) up or down. Proceed as in length adjustment. Slide drawbar all the way out and turn drawbar over. IMPORTANT: Clevis assembly must always be on top of drawbar if used. RW26277 —UN—12JUN99 Heavy duty support cannot be used with drawbar offset positioned upward. A—Offset RX15494,000008A ­19­18SEP07­1/1 Adjusting Drawbar Side­to­Side Remove drawbar locking bolts (A). Slide drawbar to desired position. Install a locking bolt against each side of drawbar. Tighten bolts. RW26278 —UN—14JUN99 Drawbar Locking Bolts—Specification Locking Bolts—Torque.....................................................

430 (318 lb­ft) A—Locking Bolts AG,RX15494,2753 ­19­18SEP07­1/1 70­3 122208 PN=169