John Deere Omar287594 — Operating Rear PTO

Drawbar and PTO Using PTO Shield CAUTION: Avoid personal injury. Put the PTO shield in correct position at all times. Do not use shield as a step. RXA0086821 —UN—16FEB06 Move main support (B) into correct position. To extend shield, lift up upper support (A) and tilt main support down. Slide main support portion of shield forward and pull up to locked position (C). Lift main and upper supports to raised position to provide clearance while connecting implement driveline to the PTO shaft. To connect an implement with an old­style tunnel shield, cut slot in the PTO shield. Cut from the edge of the main support to the small slot (D).

A—Upper Support B—Main Support C—Lock Position D—Slot RXA0086817 —UN—16FEB06 RXA0086818 —UN—16FEB06 OURX935,0000456 ­19­05AUG08­1/1 70­6 122208 PN=172