Drawbar and PTO Attaching PTODriven Implement CAUTION: Entanglement in rotating driveline can cause serious injury or death. STOP THE ENGINE and be sure PTO driveline is stopped before making adjustments, connections, or before cleaning PTOdriven equipment. TS1644 —UN—22AUG95 Keep PTO shield and driveline shields in place at all times. Make sure rotating shields turn freely. Wear close fitting clothing. Lock drawbar in center position and remove clevis assembly.
PTO Shaft Hitch Pin Hole (A) PTO Shaft End to 1000 rpm 21 Splines * 400 mm (16.0 in.) 540 rpm 6 Splines * 350 mm (14.0 in.) 1000 rpm 20 Splines ** 508 mm (20.9 in.) * 35 mm (13/8 in.) Shaft Diameter ** 45 mm (13/4 in.) Shaft Diameter Attach implement to drawbar before connecting PTO driveline. If implement will be connected to quick coupler, be sure drawbar will not interfere. RXA0058071 —UN—29OCT01 Connect driveline to PTO shaft. Turn shaft slightly by hand, to line up splines. Be sure yoke is in correct position and firmly locked. Move PTO shield into position for size PTO shaft being used. A—PTO Shaft to Pin Hole Distance AG,RX15494,2755 1918SEP071/1 705 122208 PN=171