Performance Ballasting Determining Ballasted Tractor Weight, Weight Split, Axle Loads and Required Tire Inflation Pressures The Unballasted Tractor Weight Charts provide front axle, rear axle and total weights for all power train and tire size options. From this and information previously provided on weights of various ballast elements (QUIKTATCH weights and wheel weights), front ballast multipliers and front hitch axle loads (if used), the ballasted tractor weight and axle loads can be calculated.
These are needed to determine if total weight and weight split recommendations are met and to look up required tire inflation pressures from the Recommended Pressures charts in Wheels, Tires, and Treads section. 8230 PST with Independent Link Suspension and Front Weight Support— 200 PTOHP Front Tires 480/70 R30 Rear Tires 710/70 R38 Front Ballast Weight Support Rear Ballast None According to the Unballasted Tractor Weight Charts on following pages, the front axle weight is 4767 kg (10510 lb) and the rear axle weight is 6280 kg (13844 lb). Note that these charts do not assume that a front weight support is mounted. Front Axle Weight ADDED by Front Weight Support:
170 kg (375 lb) x 1.47 = 250 kg (551 lb) Rear Axle Weight REMOVED by Front Support: 170 kg (375 lb) x 0.47 = 80 kg (176 lb) Combine all of these as shown Base Tractor Weight 4767 kg (10510 lb) 6280 kg (13844 lb) 11047 kg (24354 lb) Front Axle Rear Axle Total Total 5017 kg (11061 lb) 6200 kg (13668 lb) 11217 kg (24729 lb) Front Weight Support 250 kg (551 lb) 80 kg (176 lb) 170 kg (375 lb) So the tractor is ballasted to the level of 11217 kg (24729 lb) / 200 PTOHP = 56.1 kg (124 lb) per PTOHP (Light) For implements that generate high weight transfer add approximately 50 kPa (0.5 bar; 7 psi) for a total of 110 kPa (1.1 bar; 16 psi) for rear tires.
With the aid of an assistant, visually check tire deflection when tractor is pulling hard in the field to confirm that tires are not underinflated with these pressures. The percentage of weight on the front axle is 5017 kg (11061 lb) / 11217 kg (24729 lb) x 100% = 45%. From the Recommended Pressures charts in Wheels, Tires, Treads section for calculated axle loads, the required inflation pressures are: For trailers, tankers, or any heavy integral implement , the rear inflation pressures MUST be increased substantially to support the extra weight at transport speeds. The exact amount depends on the extra load.
Usually it will be MORE THAN DOUBLE the base amount or 130 150 kPa (1.3 1.5 bar; 19 22 psi) for this example. To determine rear axle load exactly, weigh rear axle of loaded tractor on a platform scale. Front Inflation Pressure: 165 kPa (1.65 bar; 24 psi) Rear Inflation Pressure 75 kPa (0.75 bar; 11 psi) but only if tractor is towing an implement that places very little down load on drawbar (planter or air seeder).
8330 PST with MFWD and Standard Front Weight Support 225 PTOHP Front Tires 540/65 R34 Rear Tires 520/85 R46 Front Ballast Weight Support Rear Ballast 1 pair 635 kg (1400 lb) Wheel Weights and 2 pair 205 kg (450 lb) Wheel Weights According to the Unballasted Tractor Weight Charts, the front axle weight is 4224 kg (9312 lb) and the rear is 6175 kg (13612 lb). Note that these charts do not assume that a front weight support is mounted. The weight for the weight support and transfer effect is found in the section on attaching front weights. Front Axle Weight ADDED by Front Weight Support: 170 kg (375 lb) x 1.45 = 247 kg (544 lb) Rear Axle Weight REMOVED by Front Weight Support:
170 kg (375 lb) x 0.45 = 77 kg (169 lb) The pair of 635 kg (1400 lb) rear wheel weights and two pairs of 205 kg (450 lb) wheel weights add nothing to the front axle and 2090 kg (4608 lb) to the rear axle. Combine all of these as shown Front Axle Rear Axle Total Continued on next page BB92646,000005B 1912AUG051/2 759 122208 PN=186