Performance Ballasting Base Tractor Weight 4224 kg (9312 lb) 6175 kg (13612 lb) 10399 kg (22924 lb) Weight Support 247 kg (544 lb) 77 kg (169 lb) 170 kg (375 lb) 1 Pair 635 kg (1400 lb) Wheel Weights 0 kg (lb) 1270 kg (2800 lb) 1270 kg (2800 lb) 2 Pair 205 kg (450 lb) Wheel Weights 0 kg (lb) 820 kg (1808 lb) 820 kg (1808 lb) Total 4471 kg (9857 lb) 8188 kg (18051 lb) 12659 kg (27908 lb) So the tractor is ballasted to the level of 12659 kg (27908 lb) / 225 PTOHP = 56 kg (124 lb) per PTOHP (Light). This is the ideal configuration for a 8330 tractor equipped with MFWD when it is used with towed implements such as planters or air seeders.
The front weight percentage should be approximately 35% or less to help prevent Power Hop. Power Hop can still occur, but it can be controlled using the procedures given in this section. The percentage of weight on the front axle is 4471 kg (9857 lb) / 12659 kg (27908 lb) x 100% = 35% From the Recommended Pressures charts in Wheels, Tires, and Treads section for the calculated axle loads, the required inflation pressures are: When this tractor is used to tow large trailers, the rear inflation pressure must be increased as outlined in Example 1. Front Inflation Pressure: 110 kPa (1.1 bar; 16 psi) Rear Inflation Pressure:
160 kPa (1.6 bar; 23 psi) but only if the tractor is towing an implement that places very little load on the drawbar (planter or air seeder). If this tractor is used with heavy integral or semiintegral implements, additional front ballast and higher rear inflation pressures will be required. BB92646,000005B 1912AUG052/2 7510 122208 PN=187